Product Categories

Wenzhou Philic Valve Co., Ltd.

Address: No.574 Air Port Road, Longwan District, Wenzhou, Zhejiang, China

Tel: +86-577-2897-9986

Fax: +86-577-8580-1776

Phone: +86-15958741425

Email:manger@philicvalve.com

Skype:zwtongzhi3

Cast Steel API JIS Flange Standard Globe Valve ANSI 150LB 300LB WCB Body Regulating Type

Cast Steel API JIS Flange Standard Globe Valve ANSI 150LB 300LB WCB Body Regulating Type

The 300LB 150LB regulating globe valve is mainly used in the pipeline to cut, distribute and change the flow direction of the medium. It only needs to be rotated 90 degrees and the torque can be closed tightly.

Product Details

The regulating globe valve is mainly used in the pipeline to cut, distribute and change the flow direction of the medium. It only needs to be rotated 90 degrees and the torque can be closed tightly. The ball valve is most suitable for use as a switch and shut-off valve, V-type ball valve. In addition to paying attention to the pipeline parameters, electric valves should pay special attention to the environmental conditions used. Since the electric device in the electric valve is an electromechanical device, its use state is greatly affected by its use environment.

The structure is compact, the seal is reliable, the structure is simple, and the maintenance is convenient. The sealing surface and the spherical surface are often in a closed state, which is not easily eroded by the medium, and is easy to operate and maintain. It is suitable for general working media such as water, solvent, acid and natural gas. It is also suitable for medium with harsh working conditions, such as oxygen, hydrogen peroxide, methane and ethylene. It is widely used in various industries.

Product Description:

1.Size :2"~32" (DN50~DN800)

2.Working Pressure :150Lb~2500Lb

3.Working Temperature :-20°C~425°C

4.Suitable Medium:Water,Oil,Gas and Steam.

5.Forged Materials:A105N,F304,F304L,F316,F316L,F11,F22,F51,F55

6.Casting Material :WCB,WCC,C6,C12,LCB,LCC,CF8,CF3,CF8M,CF3M

7.End Connection:Flange,Butt-Welding

8.Outside & Yoke Rising Stem or Non-Rising Stem,Blot&Bonnet design

9.Control device:Handle wheel,Gear,Pneumatic,Motor

Technical Specification:

A.Design&Manufacture standard: API 603.API 600

B. Face to face: ASME B16.10. DIN3202.

C.Pressure&Temperature standard: ASME B16.34

D.Flange standard: ASME B16.5, ASME B16.47. JIS B2220. DIN 2543-2550

E:Test&Inspect standard: API 598, API 6D.

Related Products
Inquiry